barbecue There is no more gas for the barbecue, what should I do?

The barbecue does not light:

• Check that the barbecue is correctly connected to the gas bottle and that the gas is turned on.
• Make sure that the gas bottle is not empty.
• Check that the electrode is positioned 3 mm above the gas outlet.

Steps for fitting a new gas cylinder :

• Remove the cap from the gas cylinder, make sure the regulator is closed;
• Attach or screw the regulator to the gas cylinder valve;
• Check that the connecting hose is not past its use-by date;
• Check the condition of the seal;
• Screw the connection hose to the pressure regulator with a nut;
• Open the gas cylinder valve;
• Reset the pressure regulator by pressing the reset button;
• And finally, remove the bottle and test the use of your barbecue

Explanatory video:

How do I light the gas barbecue?

When the gas bottle is connected, turn the burner control knob downwards, then turn on the button that causes the spark to light the gas. Then adjust the flame to the intensity you need. 

For your safety:

The installation or removal of the gas cylinder must be done in a ventilated area and never in the presence of a flame, heat source or spark.

For your information, in most cases your Cocoonr agency provides a second emergency gas bottle. If this is not the case, please contact the Cocoonr team.